3 Coats Of Poly On Wood Floor

3 coats is that max on a site finished floor.

3 coats of poly on wood floor.

I also typically apply 3 coats of oil borne polyurethane. 5 very thin coats would work but they better be very thin then you end up burning through it abrading it to recieve the next coat. So that s pretty much all i have to say on sanding between coats of polyurethane. He claims that i just need to wait 30 days for it to fully cure and it will match.

Choosing to apply between 2 3 layers of polyurethane formula on your surface depends entirely on the use of your structure. This acts as a sealer and provides a barrier between the wood and the oil finish you are using. To protect your surface apply at least two coats of polyurethane. The first coat should be mixed with mineral spirits.

A bristle brush is needed to apply the coats. I ve already put on a coat of sealer and two coats of poly. There needs to be 3 coats of polyurethane applied especially if you are using an oil based finish. The first two looked pretty good but the 3rd final coat is really shiny.

Unlike most other hardwood floor finishes penetrating oils don t leave a hard shell on top of the wood. When you want it done wright. For surfaces that will see occasional and hard wear such as the floor should have a minimum of three layers. Three coats of polyurethane for wood floors.

How many coats of polyurethane do you need for hardwood floors. This affects how. You don t have to do it if you buy this poly from minwax and get a second coat on within 12 hours. Oil based polyurethane hardwood floor finish.

My contractor did a patch in my oak floor and applied 3 coats of semi gloss poly trying to match the old floor. However that does not mean there is no finish in that grain and that it will get dirty or absorb moisture. Oak is heavy grained and that heavy sweeping grain is more open and will take in more of the finish. You do have to sand between coats of polyurethane on floors usually with 220 grit sandpaper with most other polyurethanes.

I ve noticed everyone recommends 3 coats of polyurethane i m using polo plaz semi gloss on a newly sanded floor. Oil based polyurethane is very tough and dense.